<< The New Rules of Media Marketing for Small Businesses
Sort By:   GridListGallery

Classifieds in Home & Garden

$10.00

 : 2 |   : 0

our connection has gained popularity underground.We sell all sorts of marijuana strians.... Orange Kush, Blueberry bud, Dutch Haze herbal smoke, Purple kush, O.g kush, Bubble gum, Jamican gold, Sensi Star x ak47, Skunk, Panama gold, Blueberry Haze, Purple haze, Granddaddy, Sour diesel, White widow, Northern Lights #5, Headband, Mango, Kryptonite, and other strains first order gets shipping or delivery free of charge . Emails...wolfeweedstore@gmail.com TXT/CALL 863-417-2370 WEBSITE ; http://budsdispensary.wixsite.com/wolfemmj

   0%

$9.00

 : 1 |   : 0

Smoke and Heat Detector 2-wire compatible with all conventional fire alarm control panel. The detector is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with non-coding fire alarm control panel. This device may help your family safe from any fire accident occur during late at night or early in the morning. Below are the features of this Smoke and Heat Detector: Two LEDs on each sides provide local 360 degree visible alarm indication. The LEDs show the detector working status and sensitivity. The alarm can be reset only by a momentary power interruption. Red LED indication and relays latched when alarm. It combines a photo electronic sensing chamber and a temperature heat detector. insect-resistant screening Twist-on mounting base with tamper lock drift compensation and smoothing algorithms remote indicator LED can be connected Specification: Operation voltage range: 9-28VDC non-polarized standby current: Maximum alarm current: Operating humidity range: Operating Temperature range: -10C to 50C Smoke Alarm Sensitivity: 1.06+/-26%FT Temperature Alarm Sensitivity: 57C Height: 55mm installed with base Diameter: 103mm

$10.00

 : 1 |   : 0

SB-116 Manual call point 2-wire The conventional manual call point is designed for fire alarm systems and security alarm systems It is with pull down plate for safe and easy press to call at emergency condition and easy to restore after the alarm. It can be reset by using the key to open the case without breaking the glass. It is compatible with all the conventional fire alarm control panel. 470 Ohm resistance Easy surface mounting base included. All wiring must be installed in compliance with the National electrical code, applicable state and local codes and any special requirements of the local authority having jurisdiction. Specification: Dimension:140mm*105mm Height: 45mm Weight: 220g Operation temperature range: -10 C to 50 C Operating Humidity range: 10% to 93% relative humidity, non condensing Latching alarm: Reset by momentary power interruption System voltage (nominal): 24VDC (9V-28VDC) Standby current: 60uA @24VDC Alarm current: 10-30 mA @24VDC

$125.00

 : 1 |   : 0

Microwave barrier develops an electromagnetic beam using high frequency microwaves that passes from a transmitter to a receiver, creating an invisible but sensitive protection wall. When the receiver detects a difference of condition within its beam, it begins a detailed analysis of the situation that, if considered a real intrusion, provides an alarm signal that can be treated in digital form. The difference of Microwave Barrier and infrared barrier is the protection area and environment endurance. On these two aspects, Microwave Barrier performs better than Infrared Barrier. Microwave Barrier can form a cubic protection space and not just a line. The space is about 2.5m *5m and can be adjustable. Microwave Barrier can be installed at wall or fence of military sites, air port, power plants where high security requirement is needed. MCB-150 is hard wired Focus brand Microwave Barrier. Below is the details: MW frequency:10.525GHz Detection distance:150m Central barrier area width:5m Central barrier area height:2.5m Grass width:0.3m Snow width:0.5m Power input:12&#65374;18 VDC Working current Transmitter&#65306;25&#65374;30mA&#65292;12VDC Receiver&#65306;30&#65374;35mA&#65292;12VDC Alarm Relay capacity:&#65288;N.C.&#65289;50mA,20VDC Alarm time:&#8804;3s Tamper switch capacity:&#65288;N.C.&#65289;0.1A,20VDC Max emitting power:35mW&#65288;common&#65289;&#65307;50mW&#65288;Max&#65289; Detection speed:0.1&#65374;10m/s Alarm output:&#8805;3s Temperature:-40&#8451;&#65374;+65&#8451; Humidity:Max 98% Dimension:158×113×46mm Water-proof design Built-in water-proof equipment, anti-rain/snow 30mm/h A microwave barrier is one of the most reliable and safe intrusion detectors used for outdoor perimeter protection.

$6.80

 : 1 |   : 0

Intruder detector burglar alarm security sensor MX-720T DMT technology pet immunity high reliable ceiling mount PIR. Quad infrared sensor 360 ceiling mount indoor room motion sensor. Features of MX-720T DMT infrared detector: 1. Adopts Random dynamic time segmentation technology which can identify pet activity and body movement. The pet-immunity up to 20kg. 2. LOADIF segment FRESNEL lens, in the surface with high density technology with dual PIR high detection accuracy. 3. Sealed lens, fully sealed anti-insect circuit system 4. Digit signal processing via microprocessor with intelligent for sample signal collection and high identification of theft. 5. Pulse adjustment of sensitivity for environment 6. Automatic environment memory and temperature compensation for free-false alarm. Specification: Brand: Focus Meian tech manufacturer Model: MC-720DMT Detection: Quad Infrared Working voltage: 9~16VDC Consumption current: 20mA~30mA Auto temperature compensation: Yes Pulse Option: Yes Pet immunity: 20 kg Alarm output: N/C 100mA /30VDC Tamper interface: N/C 100mA /30VDC Anti-white light: >8000LUX Installation: Ceiling mount Installation height: 2.4~3.6m Dimension:86diameter *25mm

$8.60

 : 1 |   : 0

Meian tech home and business security system manufacturer MD-442DMT Wired digital process MCU intelligent analysis motion sensor. Curtain style fresnel lens with intrusion direction recognition function. Embedded or ceiling mount, detection angle adjustable. Detection distance: 4m at 25C Detection angle: 20 degree (can revolving about 20 degree) Model: MD-442DMT Detection: Quad Infrared Working voltage: 9~15VDC Working temperature compensation: Yes Sensitivity adjustable: Yes Pulse optional: Yes Self-checking function: Yes Direction recognition: Yes alarm output: Solid relay, NC output tamper interface: NC, 50mA /30VDC Anti-white light: >8000LUX installation mode: wall-mounted or ceiling installation height: max. 4.8m dimension: 86*86*50mm

$17.50

 : 1 |   : 0

Complex intruder detection system quad infrared with microwave motion sensors DT-7425 meian tech manufactured Focus brand burglar alarm system. Wall mounted pet immunity hard wired Motion Sensor Features: Quad Infrared Sensor with MW sensor double intrusion detection technology are adopted for free false alarm at bad usage environment. With downward vision for thorough detection Detection distance 12m @ 25C Model: DT-7425 Microwave frequency: 10.525GHz Working voltage: 9~16VDC Working current: 8~25mA Automatic temperature compensation: Yes Pulse counting adjustable: Yes Status report: Yes tamper alarm: Yes Alarm output: N/C 100mA /30VDC Temper interface: N/C 100mA /30VDC Anti-white light: >9000LUX Installation mode: Wall mounted Installation height: 1.8-2.4m Dimension: 119*72*42mm

$0.00

 : 1 |   : 0

We are offering a wide range of pharmacy products that nearly cover all what you will need. 1)Fast and discreet Delivery 2)quality Guaranteed 100%. 3)Express with UPS,FedEx,EMS with Tracking numbers 4)No Rx require Contact Email::sales@dispensherepharm.com Contact Email::listonpharma@gmail.com Text : +1 (813) 444-6185 website:http://www.dispensherepharm.com/

   0%

Powered by Geodesic Solutions, LLC